Lock Blade Utility Knife
by asotinfinkbeiner, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Locking blade utility knife with clip. Uses standard utility blades. You will need a little screw to retain the blade.
SolidWorks files attached.
Print handle with the cavity pointing up. Print blade holder with blade slot vertical. Print pin standing on end.
Use a utility blade to trim off the "locking tab supports" and shave down the pin to fit (it may be a 1/4 mm thick depending on your plastic) Assemble the knife, and fix the pin in place with a little "ABS juice" or squirt a little Goof Off on it. Insert the blade, and attach it with an M3 x 8 screw (or similar, it's very forgiving)
Enjoy your one-handed-opening, pocket clipped, ultralight sharpness!
Possible re-designs: find a way to affix the blade without a screw. The thumb-stud could probably be reworked to gain this feature.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Lock Blade Utility Knife by asotinfinkbeiner is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving asotinfinkbeiner a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure asotinfinkbeiner would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).