Juno Pole Bracket
by cfastie, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The Juno Pole Bracket allows cameras to be attached to the top of a Ron Thompson Gangster Carp Pole. The carp pole has seven sections for a total length of 10.7 meters (35 ft). The Juno bracket can be used with five or six of the sections for a pole height of 8.1 or 9.4 m (26.6 or 30.8 feet, or shorter by removing lower sections).
The camera tray adjusts and locks at any angle for different types of aerial scene capture (stills or video). The camera tray has several 1/4" holes for mounting the camera with a thumb screw into the tripod socket.
The pole slides snugly into two clamps which grip the pole on the end where it has been reinforced with additional fiber and epoxy. Bushings fit into the clamps to allow the smaller (2nd smallest) pole section to fit.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Juno Pole Bracket by cfastie is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving cfastie a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure cfastie would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).