Lulzbot Mini 1.75mm Filament Extruder Body Mod

by loxxrider Jul 17, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

I was wondering I have a Taz 5 and wondering if this would work on the print head that I have for it

Printed and fit well. Unfortunately it snapped when trying to remove it.

there is a problem with the model
i tried to print it but only the lowerpart is printed but the tube is not printable

Hello, the problem is not with the model, it's with the settings you're using in Cura (or whatever slicer you're using). I will have to check the profile I included with it next time I use the printer but check out verhoevc's make and corresponding details to learn how he was able to print the part. Please let me know how it goes. If it still doesn't work, I might be able to help you figure out why.

Dude. This is the best! See my "make." You've opened up a world of new, cheap, colors to me!

Can you please let me know the setting for the print cause it always got a problem with slicing

Really glad it helped you. Thanks for posting details about your experience printing it. I will have to try again with my cura settings next time the printer is out. You're right to change the nozzle diameter settings to force it to print though. Thanks again for sharing.

The details page indicates that you didn't use supports when printing this - is that true? What's the best orientation to print the part with?

That is correct. I printed it upside down from the way you'd insert it into the machine. The overhang didn't matter with the ngen material and because it is a gradually-built overhang.