MP Mini Select 3D ABS & Nylon Fan Shroud

by FDM_Guru Jul 17, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Took me couple of tries but finally got it although were you put the clips don't grab to well so I improvise with a small paper clip and that did it I'm a happy camper !
thanks a lot for your hard work !

Is this for a 40 mm fan like your other shroud?

This uses the stock fan

Wow. This calibration cube I'm printing with the new shroud looks amazing! Super clean layers. A huge difference between the stock shroud and this.

Any issues with printing PLA after switching to this? Since I have both, I'm curious if the PLA wouldn't cool down as fast as necessary. I definitely need this for the ABS since I'm seeing constant delamination in ABS test prints with the default shroud.

You are correct, the best option for PLA would not be this shroud since it provides no layer cooling. Here is the shroud I designed specifically for PLA , and I just installed a connector for the fans and switch back and forth between the two designs as needed ( http://www.thingiverse.com/thing:1676718 ) I talk a little bit about it at the end of my latest vlog, and you can see how I have it installed : https://www.youtube.com/watch?v=BX1IkjUMF8c

MP Mini Select 3D PLA & PETG 40mm Fan Shroud

Cool! :D I'm subscribed to your channel, but just hadn't caught up to my YouTube queue yet :)

Be sure to rotate part to sit flat before printing. Don't end up with a lot of frustration like I did. :-)

I'm another a noob !
so ...in witch direction or position have to be in order to printed right ?
Thanks !

The end that has the two "bars" needs to be facing the bed.

Haha, thanks for that tip, I'm such a noob, I would have totally missed that.