This is an 82mm ducted brushless frame! It's like a Tiny Whoop but with all the features of the big boys. Featuring a FuriousFPV Piko BLX F3 flight controller, it flies how you want and is tune-able! You can even use the iLap transponder than comes with the Piko BLX.
Components Available at
65Drones Amazon Store
Firefly LED setup uses Neopixel RGB. You can use the link below or find the LED kit at Winder Wonder Works.
ALITOVE 100pcs WS2812B Addressable LED Pixel light 5050 RGB SMD on Heat Sink PCB Board 1-led LED Module Pixels Light 5V DC
Cura Print Settings:
ABS or PETG preferred. PLA would work as well.
Layer Height: 0.2mm
Supports: Touching Bed
Fill Amount 15%
Needed to complete the frame:
Four nylon M3x20 screws
Four nylon M3 nuts
2 rubber bands
9/6/2016 Updated with Loki and Bunny Ears vtx protection. Designs are from Jeff at Winder Wonder Works
Also if you like the Doinker, check out danricho's parameter driven model! He's got some pretty slick features on it. https://www.thingiverse.com/thing:2531356
Doinker v2.stl replaced the Doinker.stl. This version has improved durability on the motor to duct arms.
Added a plate for a battery strap. Best to print in TPU and can mount underneath the Doinker. For those of you that already have it built, you can unscrew at a time to minimize disassembly to install!
Added a BulbufetFPV Edition because he still managed to break it. Ducts are 60% thicker.
Added the "+" configuration mount for the Furious Innova vtx and micro 600tvl camera. Print in TPU. See picture for install.
Added a mount for the VM275T AOI vtx
Labeled the original Innova mount as 20deg and added a 25deg model
Added a Femto mount that allows for wiring up underneath and on top.
Added the BETA test version of the v3 frame. v2 is the latest stable model. The v3 is for testing so please let me know what you like and don't like.
Added a TX01/02 Style and updated VM275T Camera Mount
Added Doinker V3 BETA TEST MODEL 2mm FC Holes.stl for FC stacks that use M2 screws instead of M3.