Loading
idig3d

Solder Fingers

by idig3d Jul 22, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Thank you for sharing your design

Excellent...I am making one now. I think I'll make another with some magnets embedded so that if I need to push and shove a bit with the iron or solder I can slap the finger jig onto a slab of steel for ballast. Alternatively, I could print 0% infill and pause at about half way and pour some BB's or buckshot into the voids.

brilliant: "I could print 0% infill and pause at about half way and pour some BB's or buckshot into the voids."

Thanks. Another helpful addition is gluing some re-purposed mouse pad neoprene rubber on the bottom to keep it from sliding around.

Excellent ideas by all.

I glued mine to a small plank of wood, but these are far better ideas. Thanks for sharing.

Is the model public on Onshape?

At this time, no.

Nice design. I have been using 3DXTech's ASA as well. It is good stuff.

Thanks! 3DXTech is local so nice to use their stuff.