by Streetfire_Industries, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The newest lamp I made, which took a lot of inspiration from a industrial look and feel. The rings of the top cage part snap together with the cage itself and after that snap into the bottom base, which results in a glueless assembly.
Doesn't need any support or rafts, but you can use them if you like.
Print the cage part upside down with the ring on below, so you don't need any support.
The bottom part contains threads that should take most E14 lamp holders. otherwise some glue or modification may be required.
innofil silver and white PLA printed at 180 to get rid of stringing.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Industrial light by Streetfire_Industries is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Streetfire_Industries a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Streetfire_Industries would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).