This is the 3D version of the logo of Eurobot 2013 edition (http://www.eurobot.org/).
see instruction for more info
- corps_x1, one time
- gateau_x1, one time
- porte_x1, one time
- chenille_x2, two times
- bras_x4, two times and two times again but in mirror
Then glue together two bras_x4, two times. So you'll have two complete arms.
Insert porte_x1 in corps_x1 through the opening at the bottom of the part (beware of the orientation). Then glue both chenille_x2 under corps_x1 to close the opening.
Plug the two arms in the top holes of corps_x1.
Place the cake gateau_x1 inside and gently close the door, you're done!