Loading
AshleysLair

Chamber Flag 223 556 AR15

by AshleysLair Jul 28, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

I believe I have now printed a large penis

Gotta agree with HoosierPrinter. Doesn't fit any of my 556. I will try and scale it down and see if that helps. Might also help with the snapping.

Does not fit in any of my 556 chambers.

I've printed this in PLA and ABS, experimenting with different # of shells, different levels of infill from 20% to 100%.

All results are the same. If you print this standing straight up as pictured, you must ride the AR-15's bolt closed onto the flag or it will break off inside the chamber and you'll have to rod the broken plug out of your barrel. Hit the bolt release and let the recoil spring ram the bolt home, and SNAP - every time, in almost exactly the same spot on the part. See attached photo.

The part is weakest in the Z axis direction, due to the nature of laying down the layers. I'm going to try printing it lying down on its side instead of standing straight up.