This is a multi-part Pokedex phone case for the Samsung Galaxy S5. All parts are separate files so that you can print each part in its own color. Fits snugly enough so that turning it upside down will not easily release the phone, but can be taken out via the charging port cutout. All ports, including the headphone jack, are accessible in open and closed configuration
Print diffuser at 100% if you want it clear. It was printed transparent so you can still slightly see the notification light, you can either avoid printing it, print it in clear, or print it in any color and ignore the light. For the small top lights, I printed 3 at a time and printed on a raft to give each piece time between cooling, then you can pick the best of the three. This may not be necessary depending on your printer.
Press top lights into lightpad. Glue the top light circle and diffuser into top pad. Then glue top pad onto base, aligning edges.
Glue all buttons and screens into lid, turn over and glue triangle(or paint, your choice)
To connect lid and base, use standard 1.75mm filament. I use a soldering iron to melt the filament ends and fuse them to the body, however you could easily put a drop of glue into the ends after inserting and it should do well enough.
Insert phone and enjoy hunting pokemon!