Suzuki Jimny In-Dash GPS - Raspberry Pi
by GregoryHolloway, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Add In-Dash GPS Navigation to your Suzuki Jimny. Simply remove the passenger airbag, print and replace with this cover.
Full details on Instructables | http://www.instructables.com/id/3D-Printed-In-Dash-GPS-Navigation-Raspberry-Pi-3/
I have included a blank cover with no cut-out for an LCD so you can model your own design.
Love 3D printing? Love T-Shirts?
Then you need to check out steps-per-mm.xyz!
It is loaded with a huge range of wearable Parts & Components.
E3D's BigBox Hybrid Dual
You will need a large-volume 3D printer such as the BigBox. You will also need to use SpoolWorks Scaffold Soluble-Support.
Printed with SpoolWorks Black Edge.
Soak in water to remove excess Scaffold support.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Suzuki Jimny In-Dash GPS - Raspberry Pi by GregoryHolloway is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GregoryHolloway a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GregoryHolloway would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).