QIDI Tech 1 - Magnetic Door Latch
by briancmoses, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Attaching this object underneath the printer's handle and inserting magnets into the opposite end of the object creates a magnetic latch that holds the Qidi Tech 3D printer's door shut and also stops it from swinging inside the 3D Printer.
The neodymium magnets that I used were smaller in diameter at 6.35mm than the 8mm in the original object, which required a little re-design on my part.
I used OpenSCAD to import CheesePatrol's qidi-door-magnet-outside-mount.stl, fill in his magnet holes and hollow out a smaller hole for my 6.35mm magnets.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
QIDI Tech 1 - Magnetic Door Latch by briancmoses is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving briancmoses a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure briancmoses would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).