3x 18650 Battery Sled - Hammond 1590B
by AnalogDan, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
3x 18650 Battery Sled for Hammond 1590B enclosure.
Bottom of the sled wraps around the screw posts of the 1590B enclosure and has a protective barrier to make sure the terminals can't short against the enclosure. Also has channels on the bottom to route the bottom wires to the top of the sled.
I prefer to "top-mount" the battery clips, I'm worried that when bottom-mounted the downward force when inserting the battery could, over time, cause the clip/terminal to slide down and short against the enclosure.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
3x 18650 Battery Sled - Hammond 1590B by AnalogDan is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving AnalogDan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AnalogDan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).