Originally designed by constal (https://tinkercad.com/things/inrsbKb5iE0) and shared under CC BY-NC-SA 3.0.
I modified it by removing the manual supports on the top piece to let the slicer generate it's own supports.
There are holes for the screw terminals. The wires are just coming out of the side in the photo because I needed to tap some additional signals on the board.
Note: The labels on the outside of the box (+12V, GND, K0, K1) may be in reverse order than what they actually are on the thermostat board. Please check the labels on the board itself when making connections.
Monoprice Maker Select v2 (Wanhao Duplicator i3)