Now you never lose a spare memory stick for your PSP.
Fit for PSP model 3000 and may be 2000, but definitely not for old 1000 (fat).
19.04.2019: da_berch made version compatible with 1000 only, but for microSD.
01.10.2019: Afroasasyn made version with 1 MS and 2 microSD slots.
There a two variant available:
- one slot, easy printing;
- two slots, print with supports.
I made quick and dirty print SBS(semi-flex filament) with 0.6 mm nozzle.
It's works as intended. A MS fit tightly. PSP has no notice that something in a tray.
Models can be used with PLA, HIPS or SBS.
Layer height: 0.2 mm.
Nozzle: 0.3-0.6 mm.
If you print smaller or larger than needed, use Customizer or take a scad file.