Loading

MP Select Mini 75mm VESA Mount (for Pi case)

by j4c3, published

MP Select Mini 75mm VESA Mount (for Pi case) by j4c3 Aug 13, 2016
6 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Contents

Design Tools

OpenSCAD

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

3796Views 568Downloads Found in 3D Printer Accessories

Summary

9/3/2016 Update: I reworked the frames and mounting bracket. There is more space between the parts, so they should fit together easier. I put the larger cutouts all on the same side, so it should print cleaner. And, I fixed a few of the screw-holes.

One 3 hole and two 9 hole frames will Cover the back of the Mini.

I used 12mm m3 bolts to secure my Pi to the mount. 10mm with standard nuts might work, too. The screws are 3/4inch #4.

For front mounting I use this: https://www.thingiverse.com/thing:1764077

Print Settings

Printer:

Monoprice Select Mini

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

15%


Notes:

I used a .8 shell thickness. V2 is smaller, so the skirt/brim size and distance should be less of an issue.

More from 3D Printer Accessories

view more

All Apps

3D Print your file with 3D Hubs, the world’s largest online marketplace for 3D printing services.

App Info Launch App

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Whats the point of the three hole one?

Two 9 and one 3 fill up the entire height of the tower area on the Mini. You can see it if you expand the image of the printed one.

what size screws are you using to hold everything together?

I'm not at home to check, but I think the summary is correct with what I had used. 12mm m3 bolts to secure my Pi to the mount and 3/4 inch #4 screws to connect the frame parts together.

Very cool. I have a mostly-stock MP Select Mini using Cura 15.04.6, and noticed when I load this it appears to "fit", but goes grey as if it exceeds allowable printable dimensions, and was wondering if I have to do something special to get this to print?

This is likely your brim or skirt. You'd want to reduce the distance of the skirt from the model, or the width of the birm, and it should fit.

That was totally it. Brim was eating up the "edge room". Many thanks j4c3!

Where's the actual Pi case you have there?

This is the one pictured: https://www.thingiverse.com/thing:922740

This also fits for older Pi models: https://www.thingiverse.com/thing:608169

Raspberry Pi 3, Pi 2, and Model B+ case with VESA mounts and more
Raspberry Pi (Model B) case with 75mm VESA mount
Top