This is a remake of the BabyNES Raspberry Pi B+ case: http://www.thingiverse.com/thing:449877
This case fits for the actual Raspberry Pi 3 Model B. Some gaps are included so the pcb lies flat on the holding blocks. Also the screw guides at the top part of the case are made more stable.
The top and bottom part of the case are hold together with 4 M3x20mm screws. It can be necessary that the holes have to be drilled up a little bit.
Raspberry Pi 3 Model B (Rev 1.2 or newer)
5V 2.5A Power Supply with a male Micro-USB plug.
Micro SD card (16-64 GB)
Wireless (Gasia / Shanwan) or Wired Gamepad
The firmware which is used in this project is called RetroPie. RetroPie can be downloaded here: https://retropie.org.uk/
It builds upon Raspbian, EmulationStation, RetroArch and many other projects to enable you to play your favourite Arcade, home-console, and classic PC games with the minimum set-up.
For further informations have a look at: http://www.thingiverse.com/thing:449877
0.2 layer height, 5 top/bottom surfaces and 3 perimeters