Lampshade for E14 socket 3D print model
This is a lampshade used with E14 socket.
The tightening nut is nut included, altough you may not need it for installation.
I've printed it with the following parameters:
- 0.4 mm diameter nozzle
- 0.2 mm layer height
- 100% infill
- no support structure
- for safety reasons use only ABS for printing since it can withstand hihger temperatures
- always use this lampshade with LED bulbs which doesn't produce heat
- the use of light bulbs that produce heat is strictly forbidden since it can melt the model and cause trouble
Check out my blog on https://www.solidify.hu/blog !