Loading
UTJTrain

crane wagon scale 1:32 gauge 1

by UTJTrain Mar 27, 2018
Download All Files

Thing Apps Enabled

Please Login to Comment

Better than thickening the brake lever, it would be better to fill the gap between the brake lever and the bottom plate of the wheel holder (see the attached file).
Regards
Thierry

The height is now correct and the wagon connects easily with a genuine LGB wagon.
Thanks for the job done.
The next improvement would to thicken the brake levers. These parts are very weak and break easily.
Regards.
Thierry

Hi Goran.
Thank you.
I'll print it next week and will let you kow.
Regards
Thieryy

Hi Thierry
I have now downloaded the new file with 2 mm higher coupling holders.
The new file is named.

New_wheel_holders_3mm_LGB_holder_Reduced_2mm_print_2_pcs

regards
Goran
UTJ Train

Hi Goran
I opened your file in Autocad.
The result is a 2D view of the 3D wheel holder : I can't modify it.
I think that the best solution would be that you modify the wheel holder so that the coupler is 2 mm higher. With this modification your wagon will be able to run with LGB wagons.
Would you please be kind to do this work for all the LGB runners.
Regards
Thierry

Sorry it didn't want to work in height. No, I have no major problems with that.
But I have no original wagons in the LGB type .. I have now put an AutoCad file on the thingivers,
hope it will work for you. If not, get in touch again.
Regards
Goran
UTJ train

Hi UTJTrain.
My crane wagon is ready, but the couplers are 2mm too low (can't understand why). When the track goes up on a ramp, the wagon separates from the others.... Not cool.
I tried to modifiy the STL file, but it's impossible even in Fusion360 (too many facets). Could you please send to me the drawing file of the Wheel Holder, so I'll be able to modify it.
Have you got the same problem with your printed wagon ?
Regards
Thierry

hello, can you please explain how to fix wheels on the model?

The wheels are pressed onto the shaft. then pressed down into the slots in the wheel holder.
this is all.

UTJtrain
Göran

thank You very much for your answer.
other question, how to join two wagon's between? im missing something :)

To couple two or more cars together. You need a coupling. to these trolleys fits the LGB coupling. Or another,but which has the same fastening as LGB's

UTJtrain
Göran

Dear UTJtrain can you please share your coupling? I'm found only this one https://www.thingiverse.com/thing:1974185, but how i see the platform with hold wheels have other construction and this found coupling will not pass "as is". Than you :)

Hook and Loop Coupler
by jetpuf

I have downloaded the wrong file for the crane boom. I am sorry for this inconvenience. Have now replaced with the right ones. these are now called.
new right crane boom 08
new left crane boom 08
For those of you who have already've downloaded these files until 2 April. Have to change to the new files

UTJtrain
Goran

Not really, it's a free interpretation of a smaller crane car. . you can googla on / Railway Wagons & Cranes /. and look at pictures.

Good model
Does this car have a prototype?