••• New Version available: http://www.thingiverse.com/thing:2209463 •••
Made this mount for Kress 1050 (could fit other kress to). It places the kress as close to the gantry as possible and works very well. Since the lower part of the mount is exposed to heat from the motor I printed mine in PetG, it may work with PLA but I can't guarantee. Should also work with ABS.
The mount is all little higher than the original MPCNC tool mount but should work fine. I also made an extended version of the F-ToolMount (MPCNC IE) to download here: http://www.thingiverse.com/thing:1735865
The mount is made for M4 nuts and screws.
The vacuum connection is 36mm in diameter.
To mount the dust shoe just glue 8 magnets (6x3mm) in the holes. You also need to strap some brush for cnc or som thick paper/plastic around the dust shoe - search for "brush cnc" on the web.
For me this is the second version since the first had some issues, that now is solved.
If you print one - please send me a note/comment if there is something you think could be made better.
1.1 more space around Kress lock button
Print the mount standing.
Print with 3 perimeters.
Since the mount takes some time to print you could print at a very high layer height. I made mine at 0.3 layer height.