Cubone Pokemon Skull

by archav2 Aug 25, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

I remixed this to be more printer friendly. I made a hole in the back of the skull and added my own supports (that can be broken off post-printing) so it can be printed in a vertical orientation. I printed with a brim and NO supports (although if your slicing engine auto generates support, it won't hurt the print).

I could not get this to print properly the way it is sitting in the file. I will try to play with this some more. But as it sits, the nose will come loose due to lack of support even with the right amount of supports set. Just too small of a starting point I guess?

I made a remix to help with this, it's in the comments.

I have the same issue

Just printed a couple of those at 20% scale.
The model is fantastic! Thanks.

Dude. EXCELLENT post processing! I'm impressed! Did you use clay or a rotary tool or anything? I wanna try this.

Thx, I used a wood putty filler but did not sand the surface completely so that imperfections are still visable. A sand-able Clay would also work. Then I used some project knife while the putty was still wet to make some of the signature cracks on the skull.