DIN rail vert PCB mount
by rockethacker, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
mounts a circuit board perpendicular to a DIN rail. board is held in place by a few screws holding the corners. edit the scad file to match your circuit board dimensions and screw sizes. i added an ear to the original mount so that you can easily remove the unit from the rail with a screwdriver.
print at low resolution (0.3mm) with at least three shells and 20% infill
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
DIN rail vert PCB mount by rockethacker is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving rockethacker a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rockethacker would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).