Android Drawers provides a fun storage solution for small things that will be loved by Android fans and appreciated be everyone else who likes the Android logo figurine.
This is a simple print that, at standard scale, stands 120mm tall. It has four drawers... the body has the largest storage capacity followed by the head then the arms. The arms storage is a slot approx. 3mm wide so ideal for hiding away things like SD / SIM cards and a coin.
The print will take time to print and consume a reasonable amount of filament but the result is well worth the time and cost... because it's unique and fun.
The Android Drawers can be scaled down as adequate clearance has been allowed at standard scale for users with accurate / precise machines and more advanced slicing apps to reduce the size by approx.. 20% if required. The trade-off is that less small things will fit in the arm drawers as the width will be reduced slightly.
This is a really fun and practical storage unit... print one and post images of it at work!
Please refer to the print settings and images for additional information. This print requires good bridging capability (...particularly in the base of the body area. This may require some stringy filament to be cleared away post printing)
Note: If you like this check out the rest of my fun and practical designs. .
Easy print... but at standard scale it will take quite a while to print all the parts. However, the result is very cool so worth the time and filament.
The drawers have been designed with more clearance than is necessary to ensure it will print well on almost any machine. However, for users of more accurate / precise machines and advanced slicing apps this also provides the ability to downscale by up to 20% if required to reduce filament consumption and print time. The one negative with downscaling is that the arm drawers may not fir some coins etc. as they only have a narrow 3mm wide slot... so at standard scale perfect for SD / SIM cards and coins etc.
Just slide in your Android Drawers...
Very straight forward. Remove the Raft if used and install the drawers and it's ready to use.