E3D Titan Direct Drive bracket for the Smartrapcore series of RepRap printers. This bracket mounts in the same place the normal hotend bracket would be attached with the 4 screws. It holds the E3D Titan along with the NEMA17 motor. The E3D Titan then holds the E3D V6 or E3D lite6 hotends.
The bracket holds the big NEMA17 motor out of the way and does not interfere with any movement or homing. It clears the X motor during a home, and is held away from the belts as to not interfere with normal travel.
I have it fit on my Smartrapcore ALU, but it should fit the Smartrapcore and Smartrapcore 300XL since they all use the same head block.
Designed in Onshape
This is a structural part holding a NEMA17 motor. Best when printed with a higher infill for strength.