Under-Table Headphone Hanging Hook
by willsmith, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I hate leaving my headphones laying on the desk, but I couldn't find a good sized-hook or mount for them. This is sized to slide onto a 1-inch thick surface, and hold headphones beneath the desk (especially if you put a little anti-slip putty on the side that sticks on the top of the desk. It will print on a Thing-o-Matic, but's probably too big for a Cupcake.
I found that increasing fill helped make this a little more rigid, but it worked fine with default settings on a Thing-o-Matic using Replicator G 25.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Under-Table Headphone Hanging Hook by willsmith is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving willsmith a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure willsmith would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).