Quadruple Oblong for 144 MHz
by ok1cdj, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Parts for DK7ZB design of Quadruple Oblong for 144 MHz
Print from any material, without support.
You need one top holder, one dipole holder and 3 same holders.
The dipole is designed for BNC connectos.
Elements are made from 4x1 brass tube and 1.5 mm copper wire.
As support is used fibre glass pole from DX Wire, you can use any non metalic support.
SWR is good in whole 2m band.
If you have no 3D printer or time for print parts, you can buy parts here:
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Quadruple Oblong for 144 MHz by ok1cdj is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ok1cdj a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ok1cdj would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).