Buildings and military units for King of New York
by firebirdman, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These models can be used to replace the cardboard tokens in the board game King of New York. The buildings have a hollow section at the bottom, where the corresponding military unit can be stored until the building is destroyed.
Most of the models are based on other people's models. This project wouldn't have been possible without the original authors. The sources for the various pieces are as follows:
- The jeep: ashleyaria's "Willy's Jeep" (394072)
- The jet: pmstan's "F/A-18 Hornet" (641335)
- The buildings: Skimbal's "Sim City 2000 Tabletop Play Set" (12673)
The original tank was based on the model of an M10 GMC from m_bergman's "1:200 Tanks and Vehicles, 1944-45" (232248), but I ended making a whole new model for it.
The jet and the tank can be printed either as a single piece, or as multiple pieces to avoid overhangs. The "jet-connector" is meant to make it easier to align the pieces if your using superglue for assembly, but using it will require a well calibrated printer.
More pictures are available in my blog.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Buildings and military units for King of New York by firebirdman is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving firebirdman a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure firebirdman would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).