Loading
matt448

Playmobil Fence and Gate

by matt448 Sep 12, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

If I may one more suggestion. Double joining fence part to extend connecting corals to have cows and horses separate. added screenshot to demonstrate, or if you think of better way...

exactly, though if you think it should be somehow different we could do brainstorming. But I think it could work for expanded barns. Good work and thanks!

Hello, I have printed all files provided and the result is ok with standard PLA at 0.1mm resolution. However I tried with wood PLA at 0.27mm and I couldnt connect the parts at their joints. Even with scalpel and sand paper there is a lot of work on them. I will try to lower layer thickness on wood PLA prints and let you know.

Other issue are the joints where I would need (kids would need) adjustable angles and that it doesnt snap/slide out of joint when they rotate them. Having for example 5-6 pieces they cant use 180 or 90 degrees. Something in between is needed. Rounded the joining edges of the joints would help with that.

Would you consider an update to incorporate round joints for free rotating as they build their own coral?

I used now same wood PLA with 0.15 (Northbridge Kexcelled brand) and it printed without clogging, more over it printed with enough details to be used for joining with others I already printed. http://www.northbridge3d.com/?p=35

@Coudys I uploaded a new fence section with rounded joints. I also rounded over the three slats so they weren't so sharp.

I'll try out your suggestion and round the joints. After I print and test I'll post the new model. Thx.