Loading
coparatech

Heavy Duty Extruder Idler and Latch for Lulzbot Mini

by coparatech Sep 12, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

This is awesome, Printed it and it fits my taz 5 just fine!

Brilliant improvement over stock. With a little trimming of the faces which contact the extruder body, this enabled me to print 1.75mm filament. Thanks alot!

That's awesome! I had no idea it would work with 1.75 mm. Thank you for the tip!

I printed one of these up for my Dual V2 head and it works nicely. Great thinking on the little tab and slot at the top. It really keeps the spring loaded screw block from riding up as it tends to. Can't speak to the durability yet, but I did print this on a Stratasys Uprint printer so it should be pretty tough! Thanks a bunch :)

Thank you for your comment. I intended to use a heavier duty filament, but I had some nGen loaded up so I made a prototype with that to try out. That's been several months ago and it still going strong. I did make one in ColorFabb XT and one in HT just in case the prototype failed, but so far, so good. ;)

No problem! Mine are still working just fine. both the ABS,one on my primary extruder, and PLA one on the secondary,