A 3D Printed Canopy for the RMRC Nano Skyhunter. They do include a canopy with the kit that would work just fine, but I wanted to make something that everything just fit into.
It was made to use their Cricket Pro VTX, but anything smaller should work too. There are slots for a strap to hold the VTX in and another to hold the antenna for a more secure mount.
I used a 90 degree elbow to get the antenna where it should be.
On my printer, I print it on end (with the back of the canopy on the bed) with 0% infill and it prints just fine. Support is needed. If you print it in any other orientation, you will need infill.
Credit and thanks to MultiRC for the Universal FPV Camera Mount (http://www.thingiverse.com/thing:1110726 ) - which I used to mount the camera at the front of the canopy.
No infill is needed if you print it with the back of the canopy on the bed.