Here is a remix of my initial design but fits a RepRap Full Graphics LCD instead of the SainSmart. This was requested in a comment of my original design. The design actually turned out nicer than my original for the SainSmart so I will be updating that one as well.
I have uploaded all the files including the Riser Feet, RepRap Case, Button, and Encoder Knob. As well as uploading SolidWorks, STL, STEP, and IGES files.
Please note: I have no need for this style Case, so I have not printed to ensure a good fit. Print at your own risk lol!
This case was designed around a RepRap LCD I found on GrabCAD here: https://grabcad.com/library/full-graphic-smart-controller-1
I uploaded a REV2 version of the Front which has the Logos cut into the Front instead of having to glue them on. You would print this in the orientation I have the STL file (face down). I just printed the Front on my SainSmart Case which is almost identical to this one and it came out great. No issues with the little bit of bridging.
Also in REV2, I modified the Button to be attached to the Front instead of a separate print.
Or I also uploaded an STL (Front_REV1_with_Logos) which has the Logos already incorporated but you will need to print with supports then. Like someone has already done in the I Made One section.
There are a lot of files, hopefully I didn't miss anything.
Don't forget to Like and upload your Make!!!
(1) RepRap Full Graphics LCD Controller with Cables (obviously)
(4) #10 - 1" Long Rounded Head Screws
(8) #4 - 1/2" Long Flat Head Screws