Big Drinking Bird
by mrigsby, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a scanned and magnified drinking bird. The head, body and feet were scanned with a Makerbot scanner. The other parts were designed to match.
Full instructions are available at :
Print the head and body at about 350% size.
The acrylic neck tube is 1 1/4 inch OD; two feet long.
The legs are 1 x 2 oak. I took a four foot section, drilled a 1 1/8 inch hole in the center, then cut the wood in the center of the circle. The legs slide into the base piece.
I mounted the head and body by drilling and using a small screw (on the back side).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Big Drinking Bird by mrigsby is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving mrigsby a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mrigsby would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).