A case for a RPi based home theater.
The design was made with FreeCAD http://www.freecadweb.org
Make is used here to automate the STL export and gcode generation workflow. Attached are the makefile and FreeCAD python script used. You will have to adjust these to your configuration. E.g. the paths used pertain to my specific setup.
[2016-10-14 Finished. Right to the 'hello' you see the prototype prints]
Material used: PLA 3mm Green
Thread the screwholes in the front and back panels with M2.5. The top and bottom covers are screwed on the front and back panel with 5mm M2.5 bolts.
The HifiBerry board is mounted on the RPi with M2.5 spacers. The ensemble is fixed to the case with two clips. Thread the screwholes in the clips with M2.5 and mount them on the bottom cover with 5mm M2.5 bolts.
A perspex/plexiglas screen, milled to fit, is mounted with hot-glue.