Loading

GHOSTS

by muzz64, published

GHOSTS by muzz64 Oct 8, 2016

Design Tools

Rhino

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

2569Views 1437Downloads Found in Household

Summary

GHOSTS are simple, decorative prints for Halloween and party decoration... or just for fun any time. Two files have been provided that mount in different ways.

The wall mount type is ready off the build plate to hang over a small nail or screw head (Head size up to 6.25mm / shaft size up to 3.0mm)

The hanging type needs to be threaded to hang. Thread down through the hole in the top into one of the eyes, thread across between the eyes, then thread back up and out the top. Translucent thread is the best to use as it's almost 'invisible' but harder to thread as you can't see its end easily. The 'easier threading tip' is to thread some coloured thread first, tie it onto the translucent thread and pull it back through in place of the coloured thread (Refer to images for additional understanding of this suggestion).

Easy and fun... GHOSTS look great printed in white and glow-in-the-dark filament.

At standard scale each ghost is 110mm tall. Scale up / down to suit but bear in mind this will affect the hole / wall mount fitting.

Please refer to the instructions and images for additional information... and post images of your GHOSTS haunting your home or office....

Note: If you like this check out the rest of my fun and practical designs.

Print Settings

Printer Brand:

MakerBot

Printer:

MakerBot Replicator (5th Generation)

Rafts:

Doesn't Matter

Supports:

No

Resolution:

Standard / 0.20mm

Infill:

3 Shells / 10% infill


Notes:

Easy prints. Recommend using 3 shells to ensure the curvature on the edges is well built. Using 3 shells keeps the wall thickness thicker in areas with tighter curves.

Post-Printing

Just hang or wall mount your Ghost...

The wall mount type is ready off the build plate to hang over a small nail or screw head (Head size up to 6.25mm / shaft size up to 3.0mm)

The hanging type needs to be threaded to hang. Thread down through the hole in the top into one of the eyes, thread across between the eyes, then thread back up and out the top. Translucent thread is the best to use as it's almost 'invisible' but harder to thread as you can't see its end easily. The 'easier threading tip' is to thread some coloured thread first, tie it onto the translucent thread and pull it back through in place of the coloured thread (Refer to images for additional understanding of this suggestion).

More from Household

view more

All Apps

Upgrade this Thing with Thingiverse Apps

Tools and Utilities

Repair, slice, or enhance this Thing


Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

just the type of ghost i was looking for thx

Top