eMaker Huxley Y-axis belt tensioner
by joo, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
derivative of chrille's belt tensioner to fit the eMaker Huxley.
Hole pitch 16mm and belt-clamp for T2.5 timing belts.
It should also work on the reprappro Huxley
Replace your standard Y-axis belt clamp with this adjustable version. I used two 25mm M3 bolts for mounting.
While i eventually managed to get it replaced without removing the bed i strongly recommend to do so ;)
3x M3 nut
2x M3 25mm screw
1x M3 12mm screw or longer
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
eMaker Huxley Y-axis belt tensioner by joo is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving joo a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure joo would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).