Yikes! Why does Thingiverse hate me? (or Opera)
I won't write & upload it all again.
Check out the Video here: http://youtu.be/BNK8JXje5JY
As even with my printer I was not able to print such a tiny working gear (at least without changing everything) I used a piece of string which winds arround the axis and turns the disc! (See Build instructions below)
Check out http://www.thingiverse.com/thing:17769 for the design this is based on and better pictures / color sheme. Sorry, I still have not colored it.
More Info on the semi-daily-earrings: http://thingiverse.com/thing:7120
pp3dp UP+: Finest settings, 10Â° Support angle, 5 density, 10lines, or something like that.
Print speaker pointing UP
-Carefully insert disk's axis, carefully bend the parts to make it fit
-use string (not too long), tie a knot/loop, put it over that axis with tweezers
-add a small drop of instant glue
-pull string through the front hole
-knot to crank, use a drop of glue
-wait untill the glue is dry!
-cut off loose threads
-wind the disk untill most of the string is wound up
-put crank into the holes
-glue the ball to the end of the crank so it will not slip out (even though the string somewhat holds it in place)
-carefully turn the crank, enjoy!
Color sheme and scale see http://www.thingiverse.com/image:110359