52mm Camera Lens Cap

by powermos Sep 21, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

I printed in an Creality Ender 3 and the result was great! Fantastic design! Great work!

Thanks. Printed and fitted to the camera lens

Comments deleted.

Is there some trick to printing this? I've tried it 3 times now using ABS and PLA and the parts just don't fit together at all :-(

My printer is calibrated to .25mm, but the tolerances on this may be too close.

Hi, the tolerances are such that the parts should fit together, but not too tight. You should be able to press them together by hand, but you can also try to tap them with a hammer. Maybe you are overextruding? I would suggest printing something like the 20mm calibration cube and check with a caliper if it's exactly 20mm

Printed a 20mm calibration cube. It measures 19.98 on the Y, and 19.88 on X. That's the best I've been able to get with this printer, and still within .12mm.