Dryer knob, Fridgidaire
by EvaHakansson, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
3D printed solution to an everyday emergency - a broken knob on the dryer!
I printed it in NinjaTek SemiFlex because that's what was loaded in the printer. A rigid material will work equally good or better. The springs from two of the knobs were still in place, so I pressed them into the knobs. The 3rd knob (for Cycle Signal) was just pressed onto the shaft without the spring. You may or may not use the springs for a rigid material.
Original Inventor file included.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Dryer knob, Fridgidaire by EvaHakansson is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving EvaHakansson a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure EvaHakansson would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).