Weather Prognosticator (RGB LED cover)
by FlyByPC, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
RGB LED strip holder, for the Weather Prognosticator project described at http://www.paleotechnologist.net/?p=3993 .
You'll need to print five of these (supports are needed for the cantilevered screw mountings). You'll also need an Arduino Uno, an Arduino Ethernet card, and a Radio Shack RGB LED strip. Code is available at the website above.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Weather Prognosticator (RGB LED cover) by FlyByPC is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving FlyByPC a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure FlyByPC would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).