by sk8rjess, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I DID NOT MAKE THIS!! I like to keep things I'm printing in one location, i'm simply uploading this from another site. The creator is Erik Cederberg(https://www.youmagine.com/meduza), he gets 100% of the credit!
Taken from original page:
A stackable fuseholder for automotive blade fuses that uses nothing more than 3D printed parts, M3 screws and regular blade connectors
I thought that most fuse holders were way too bulky for a project of mine, so i made these instead :) Print one endpiece, one startpice and as many middle pieces you want to stack for your project.
Materials and methods
For the total:
- 2 pcs M3 Screws of a length that suites your stack
- 2 pcs M3 Nuts
For each holder:
- 2 6.3mm blade connectors
- 2 pcs of cable, i used 1,5mm^2
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Stackable Fuseholder by sk8rjess is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving sk8rjess a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure sk8rjess would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).