5 days of development and we got this, a handheld and quickly reloadable nerfgun that is also super easy to build!
All it needs is 7 M3x10 and 3 rubber bands!
You can find videos about this project and others at my youtube channel:
2016-10-16 edit: Added nerfpistol_clip_wide.stl which is simply wider than the original clip by 2mm.
2016-10-30 edit: Added nerfpistol_body2_v1.1.stl which is easier to assemble.
2016-11-21 edit: Added nerfpistol_clip_widev1.1.stl The same wideclip but slightly modified for a better fit.
2016-11-26 edit: Added beta parts that should work with 75mm long nerfs.
2017-01-02 edit: Added final parts for 75mm long nerfs, reprint the files ending with V1.2.
-Longer/wider clip and adjusted geometry on the bodies to accommodate longer darts.
-Moved slide rail down a bit to make it easier to put together and take apart.
-Strengthened the slide where it most often broke/delaminated
-More gap added to make sure the firing bolt does not hit the slide reload mechanism.
Check me out at:
3d hubs: https://www.3dhubs.com/malm%C3%B6/hubs/mrcrankyface
The main body need some support but it should be easy to remove with a sharp knife.
The slide that goes along the barrel needs to be printed lying down, at higher infill with more perimeters to last.
The reload slide also needs to be printed with high infill/perimeter if you want it to last as good as possible.