Loading
mat_neu27

The Dyson AA - Accessory Antlers

by mat_neu27 Sep 24, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

I made both of these and they work great! Thanks!

Now that I have them I'm debating where on the wall this will hang. Turns out my most useful location won't me make full use of the left side socket. I was debating remixing it to make one for fitting in a corner. But it occurs to me now that you've done the hard work of modeling the clamps I could just use that to make an L bracket style and mount that to the wall instead.

More to come if/when I get around to modeling it. Thanks again!

you are welcome :) Feel free to create an edge edition. If you are familiar with freecad you can use the source as well. The problem with an 90 deg turned clamp would be that you will loose the first slot because you can't slide in a brush close to the wall. Alternative you could add a third slot but at least only for light brushes.
Anyway i tinkered a bit in freeCad: is this what you thought about?
https://www.dropbox.com/sh/hpt7x9trnth5m7v/AAAFSrZ_yUDRGoEDcmsCHBDXa?dl=0