This is a replacement joystick button for the 05-07 Ford Escape GPS navigation head unit.
The joystick button is located on the lower right of the GPS navigation head unit.
Print the model with the larger flat side down.
Print the bottom layer at 50% speed to make sure the curves set in.
You will need to use a 1.5mm-2mm diameter drill or screwdriver to widen the hole in the stem of the button in order to fit it onto the metal cylinder joystick that the original joystick button was stuck onto.
If you twist the metal cylinder clockwise when fitting this replacement, it will screw down and become less press-able. Rotate the metal cylinder counter clockwise to make it press-able again.