Wireless stepper control
by misan, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
What you see below the CNCshield is not an Arduino UNO but a Wemos D1 board.
I plan to use this to replace the Arduino UNO in my 4xiDraw http://www.thingiverse.com/thing:1444216
Code includea trapezoidal speed profile (like GRBL).
You connect to it using 0123456789 password (it can be changed in the source) and using netcat -u 192.168.4.1 9999
SSID and password can be adapted to fit your wifi network, in that case you'll have to figure out the IP address obtained by the board.
Servo control has been added, use M3S(microseconds) command to set that pulse width for servo output on pin (pulse Z) D14.
A sample capture of the output is provided in case you want to see the timing details of the thing.
More up-to-date code can be found here: https://github.com/misan/ESP-stepper-servo/
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Wireless stepper control by misan is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving misan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure misan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).