Hasselblad SWC lens hood
by Sixpm, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
You will need a 62mm to 67mm filter adapter ring to make use of this hood as there is a retention ring to hold the hood into place (i didn't need to use any glue as it was tight enough to keep it in place). Print these two part separately and the small ring should clip into the filter ring by the threads by pushing it from the front of the hood toward the ring to lock it in place.
Flashforge Creator Pro
I use 30% carbon PLA for this as it's very sturdy and not easy to break.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hasselblad SWC lens hood by Sixpm is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Sixpm a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Sixpm would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).