This is a thin iPhone 6/6s case, designed completely from ground up using Apple's case specifications, It has the same curve and corner rounding of the phone itself.
iPhone 7 case is here: https://www.thingiverse.com/thing:2404836
The tolerance are tight, it is a trade-off between tight fitting, but just flexible enough to snap over the phone. It was designed for rigid filaments,
This is a very slim design, which is my personal preference, but such that it still can can be put face down without scratching the screen.
I've made several organic patterns, but posted the Flower of Life here.
My filament preference is for wood filament for a more natural look and feel., It also has a tactile feel to it and can be sanded down
For printing I have added anti-warp discs, just snap then off. Any form of warping will prevent the phone from fitting properly. After printing clean any residue or whatever from the inside curve, any blobs will also prevent the phone from fitting properly.
I printed at 0.2mm layer and at 80-100% infill..
Please note the license, it is for personal use only, with no commercialization
- increased area around camera
- added more support at bottom corners