If you are looking for a more polished stand take a look to version MK3.
This stand has a nice feature: The inclination can be adjusted, and therefore the laptop screen position (in height).
From an ergonomic point of view of, the top border of the laptop screen should be at the same height than your eyes.
It is designed to be 20cm width, and this size serves for almost all laptops, from tiny netbooks to the biggest gaming monsters.
You will also need the following vitamins:
• 3 x 8mm (and 20cm long) threaded bars
• 12 x M8 nuts
• 12 x M8 washers
If it's hard for you to find these threaded bars just contact me: I can cut them for you.
Although the provided files are for 3D printers, this stand is a perfect candidate for a laser cutter also.
Print 2 supports and 2 arms
Insert a washer, two nuts and a washer again in each threaded bar
Screw the arms through the printed pieces as shown in the pictures
- Insert the rest of washers and adjust them
In order to set the stand inclination, simply unscrew a bit the arm nuts and move the two threaded bars through the support rail.