by gyroscope07, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Do you fidget at work or school? Are you an annoying pen clicker? The fidget spinner is a great alternative, it's silent, weighty and addictive... It's literally the greatest thing since sliced bread!
The STL accepts standard 608 bearings.
No glue needed, just pressure fit the bearings, I found it easiest to put the bearing on a table and push the spinner on to it evenly with something flat.
See it in action! https://www.youtube.com/watch?v=sFd6eRbALGk
0.1 Looks awesome 0.2 works too
10% - 30%
Printed in PLA with a 0.4mm Nozzle and 1.2mm walls so the bands holding the outermost bearings in were solid plastic. The bands are also quite thin so be sure to use a skirt when printing. May need to adjust size for ABS to account for shrinkage.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Fidget Spinner by gyroscope07 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving gyroscope07 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure gyroscope07 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).