Loading
infamousriz

TriSkullQuadraClops Candy Dish

by infamousriz Oct 14, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

I am curious about something that might be of interest. Could you make the Iris with the hole clear through, and the eyeball hollow or with a larger hole through the middle to facilitate putting an LED and a coin cell battery in them? Coin cell could be any standard one, but the hole would obviously have to be big enough for the battery to fit inside. This would allow the Eyes to light up and give it a very unusual character. The other thing I am interested in is putting an LED and battery inside the mouth area of each skull. They could be just put together and centered under each mouth and taped in place. making a bottom plate might make it able to drop those in and not worry about them falling out all over the place either. I am going to try to get this to print on my Anycubic Delta Pully. I'll get a pic when it is finished, HOPEFULLY before Halloween....

I just printed this out and it seems the eyes are at a different scale as the head. I checked the files in this project and the one it was remixed from and everything is the same size. I didn't see anything in the instructions about having the scale the eyes, but seeing there are some makes and no one else saying anything about this problems, I'm guessing it must be something on my end.

EDIT: And now I see someone else had reported the problem about 9 hours ago. I had started this message before I went to work and didn't refresh it before I sent the message.

Thanks for looking into infamousriz.

I have uploaded some new eyes, you could also scale the originals to 70%

The dish printed small around 100mm and the eyes were way to big. Maybe the skull auto sized to my build area.

I have uploaded some new eyes, you could also scale the originals to 70%