Finally! The square one has arrived! Have fun shuffling the shape-shifting cube to see if you have what it takes to solve it.(this cube was not colored at the time of this posting, but the square one has the same color pattern of a standard cube)
assembly is pretty straightforward. You need to print 8 small and 8 large slivers along with 2 core pieces. Once printing is finished (and slight filing), take a nail, screw, piece of filament, etc, and glue it into the hole on the inside of one of the the cores. Next, put the pieces on both sides of the cores. Lastly, use hot glue (this is important, because we don't want it to stick, just act like rubber to stop the core pieces from sliding off easily.) to glue in the other side of the shaft. Let the glue cool/dry (if you used something else to flue the first part of the shaft in), then enjoy!
This cube feels (and is) quite loose, but don't worry, if you have a somewhat decent printer, your pieces won't fall off.